New Armour Values and Changes
Posted: Mon Sep 01, 2014 11:42 pm
I’d like to address the recent armour value changes which have started to take effect and are being implemented slowly (as far as I can tell at this moment only to recent custom chest piece orders - four, I think, from what I've seen in-game? -, shop armour and a ‘fix’ to one single piece of older custom armour). I wanted to post this publicly because it doesn’t seem this is a topic on which the community was informed at all - outside of one assist answered -, and it’s a fairly large, unbalanced and game-altering change to throw out there with near complete silence. Especially when it’s considered there is no set day for all previous orders to come in and get changed, and it seems only one old armour changed despite a character with another set of previous settings standing right beside the person who had theirs ‘fixed’.
For those of you who don’t think about mechanics much or have little interest in them at all, I’d like to lay out the way armour operates if you aren’t aware, just so you have some understanding of how it works (if you don’t already) and how it’s been changed (as explained in an answered assist). Armour in Shattered Isles works like it does in previous games a lot of people here are familiar with. It’s got a base percentage absorption attached to it and then it has a static number value - basically making it so your high-end armour isn’t letting damage from extremely low level MOBs make its way through. It’d be a little strange to see a forest critter which does 2-4 damage still doing 1-2 through top tier armour. There was a noticeable change after the recent armour orders from July, an assist was sent in and it was passed along that the formula for armour was going to be switched around - static was going to be absorbed first, followed by the percentage which was a reverse of the previous which has been in effect since October.
In theory it isn’t a big change - somewhat noticed, but easily adapted to -, unfortunately in practise it seemed not to have been tested and there’s some major problems that come with it.
If you’ve never had a piece of custom blacksteel or arcsilver, then you might not know it used to protect roughly 50% plus the static number. A static number being a set number of damage it’d protect against no matter what. Materials like fur and cotton, they’re at the bottom end of the material list, something which was probably noticed when you’ve upgraded from the academy armour to custom armour or even steel. Steel used to be roughly 40%. Obviously, these values are subject to change, yet the change we’ve seen implemented I don't think was thoroughly tested. I sincerely hope this result wasn’t intended and I’ll get to that now.
I don’t want to give exact damage values taken because I don’t think that’d be fair to other players, so instead I’m going to give the difference/spread in points of protection given.
After some testing over the week, this is what was found out. Naturally, give a point or two in either direction for the sake of safety and the RNG.
Here were the results of the test (against a high damage attack for clarity’s sake, these were not low numbers being thrown out to skew the results):
Fur armour: Protected roughly 2 points more than unarmoured.
Thoraxium armour (said to be above steel): Protected roughly 1.5 points more than fur armour and 3.5 than unarmoured.
Steel armour: Protected roughly 1.8 points more than fur armour and 3.9 than unarmoured.
Arcsilver armour: Protected roughly 2.2 points more than fur armour, 0.72 points more than thoraxium, 0.36 points more than steel and 4.26 points more than unarmoured.
As you can see, thoraxium, steel and arcsilver (and since arcsilver and blacksteel have the same protection values, it can be assumed blacksteel can be included, in addition to any other materials in the stores or sold at the armour peddle during the festival) protect near the same with miniscule differences between them.
The reason I believe this is to be the case, because whilst I am to understand the intended change - as related in answer to an assist - was to make it so the static absorbed first and then the remaining damage was divided by the armour’s set percentage absorption I think the game’s mathematical properties are doing something completely different. I believe it’s taking the static number which is now set first and instead of taking a percentage of the remaining damage, the game is dividing the static number before it spits out how much damage you’ve taken, and that’s the result. The static number divided by percentage is the total you protect for overall. Not both as it used to be when the formula was percentage and then static.
If you look at the numbers and go through the static value set to them (for example, blacksteel/arcsilver have 5 points set to them) then 5 divided by %50 equals 2.5, but the game rounds numbers which would take it up to 3. Or roughly in the area (taking into account rng variations between tests) of the difference between arcsilver armour an unarmoured. The same applies for the static numbers of fur, steel, presumably thoraxium and all the other store bought armours.
I cannot accept that this was the intended change. The protection value differences are minimal at this point, and would make it pointless and a waste to purchase higher material tiers because they are protecting less than a point more than store bought steel in this system.
I highly encourage staff to please, please be consistent in testing changes - no matter how small or significant, and this one is incredibly significant - before throwing them out to the players. If it’s going to be thrown out to the players, please have the decency to inform them in matters such as armour protection values being changed, in particular if it isn’t readily tested beforehand. If it’s where the core absorption or damage settings, matters of a mechanical nature, are being changed in a huge fashion please set a date to change every person’s old piece at the same time, so half the game isn’t protecting such a hefty number compared to newly purchased or singularly ‘fixed’ pieces. It isn’t cool nor fair to any player to have untested mechanical changes thrown into the live world with little or, as more often is the case, nary a word given to them so they might know what to expect and give proper feedback. Lack of testing and chosen silence hobbles the playerbase in its entirety in PVE/PVP.
I’ve mentioned it before, but there is a test server and there are willing players to go to that test server or even an isolated area within the live server. They’re willing to offer their time, energy and feedback in a way which will allow skills, abilities, weapons, armours, effects and any number of mechanical changes to be documented and properly assessed before potentially throwing the live, interactive world out of balance. Throwing something out and hoping it isn’t buggy or that you’ve guessed it’s going to work correctly isn’t fair to anyone, and it’s going to keep causing problems down the road. Obviously, issues arise with even intensive testing but it isn’t being done here. Please give the players that chance so it stops making the live world unbalanced for people who may or may not get caught up in the thrown net of untested changes.
For a final number to consider - after extensive hunting with both unarmoured and new!arcsilver numbers shown:
A greater vampire hit an unarmoured person up to 35.
A greater vampire hit an arcsilver armoured person up to 32.
A three point difference.
Thank you to those of you who read.
For those of you who don’t think about mechanics much or have little interest in them at all, I’d like to lay out the way armour operates if you aren’t aware, just so you have some understanding of how it works (if you don’t already) and how it’s been changed (as explained in an answered assist). Armour in Shattered Isles works like it does in previous games a lot of people here are familiar with. It’s got a base percentage absorption attached to it and then it has a static number value - basically making it so your high-end armour isn’t letting damage from extremely low level MOBs make its way through. It’d be a little strange to see a forest critter which does 2-4 damage still doing 1-2 through top tier armour. There was a noticeable change after the recent armour orders from July, an assist was sent in and it was passed along that the formula for armour was going to be switched around - static was going to be absorbed first, followed by the percentage which was a reverse of the previous which has been in effect since October.
In theory it isn’t a big change - somewhat noticed, but easily adapted to -, unfortunately in practise it seemed not to have been tested and there’s some major problems that come with it.
If you’ve never had a piece of custom blacksteel or arcsilver, then you might not know it used to protect roughly 50% plus the static number. A static number being a set number of damage it’d protect against no matter what. Materials like fur and cotton, they’re at the bottom end of the material list, something which was probably noticed when you’ve upgraded from the academy armour to custom armour or even steel. Steel used to be roughly 40%. Obviously, these values are subject to change, yet the change we’ve seen implemented I don't think was thoroughly tested. I sincerely hope this result wasn’t intended and I’ll get to that now.
I don’t want to give exact damage values taken because I don’t think that’d be fair to other players, so instead I’m going to give the difference/spread in points of protection given.
After some testing over the week, this is what was found out. Naturally, give a point or two in either direction for the sake of safety and the RNG.
Here were the results of the test (against a high damage attack for clarity’s sake, these were not low numbers being thrown out to skew the results):
Fur armour: Protected roughly 2 points more than unarmoured.
Thoraxium armour (said to be above steel): Protected roughly 1.5 points more than fur armour and 3.5 than unarmoured.
Steel armour: Protected roughly 1.8 points more than fur armour and 3.9 than unarmoured.
Arcsilver armour: Protected roughly 2.2 points more than fur armour, 0.72 points more than thoraxium, 0.36 points more than steel and 4.26 points more than unarmoured.
As you can see, thoraxium, steel and arcsilver (and since arcsilver and blacksteel have the same protection values, it can be assumed blacksteel can be included, in addition to any other materials in the stores or sold at the armour peddle during the festival) protect near the same with miniscule differences between them.
The reason I believe this is to be the case, because whilst I am to understand the intended change - as related in answer to an assist - was to make it so the static absorbed first and then the remaining damage was divided by the armour’s set percentage absorption I think the game’s mathematical properties are doing something completely different. I believe it’s taking the static number which is now set first and instead of taking a percentage of the remaining damage, the game is dividing the static number before it spits out how much damage you’ve taken, and that’s the result. The static number divided by percentage is the total you protect for overall. Not both as it used to be when the formula was percentage and then static.
If you look at the numbers and go through the static value set to them (for example, blacksteel/arcsilver have 5 points set to them) then 5 divided by %50 equals 2.5, but the game rounds numbers which would take it up to 3. Or roughly in the area (taking into account rng variations between tests) of the difference between arcsilver armour an unarmoured. The same applies for the static numbers of fur, steel, presumably thoraxium and all the other store bought armours.
I cannot accept that this was the intended change. The protection value differences are minimal at this point, and would make it pointless and a waste to purchase higher material tiers because they are protecting less than a point more than store bought steel in this system.
I highly encourage staff to please, please be consistent in testing changes - no matter how small or significant, and this one is incredibly significant - before throwing them out to the players. If it’s going to be thrown out to the players, please have the decency to inform them in matters such as armour protection values being changed, in particular if it isn’t readily tested beforehand. If it’s where the core absorption or damage settings, matters of a mechanical nature, are being changed in a huge fashion please set a date to change every person’s old piece at the same time, so half the game isn’t protecting such a hefty number compared to newly purchased or singularly ‘fixed’ pieces. It isn’t cool nor fair to any player to have untested mechanical changes thrown into the live world with little or, as more often is the case, nary a word given to them so they might know what to expect and give proper feedback. Lack of testing and chosen silence hobbles the playerbase in its entirety in PVE/PVP.
I’ve mentioned it before, but there is a test server and there are willing players to go to that test server or even an isolated area within the live server. They’re willing to offer their time, energy and feedback in a way which will allow skills, abilities, weapons, armours, effects and any number of mechanical changes to be documented and properly assessed before potentially throwing the live, interactive world out of balance. Throwing something out and hoping it isn’t buggy or that you’ve guessed it’s going to work correctly isn’t fair to anyone, and it’s going to keep causing problems down the road. Obviously, issues arise with even intensive testing but it isn’t being done here. Please give the players that chance so it stops making the live world unbalanced for people who may or may not get caught up in the thrown net of untested changes.
For a final number to consider - after extensive hunting with both unarmoured and new!arcsilver numbers shown:
A greater vampire hit an unarmoured person up to 35.
A greater vampire hit an arcsilver armoured person up to 32.
A three point difference.
Thank you to those of you who read.